Low-alloyed Electrodes
ES 502 - 15 A5.5: E 8015-B6 / EN 1599: E CrMo5 B 42 H5
Description
ES 502 - 15 is an LMA electrode containing 5Cr0.5Mo for welding creep-resistant steels. It is especially suitable for pipe welding. The electrode runs with a quiet, stable arc and gives a minimum amount of spatter loss. A preheating and interpass temperature of 150-260°C is normally required. The mechanical properties stated here are afterone hour of heat treatment at 740°C. Redrying temperature, 350°C , Redrying time,2 hours, Recovery115
Typical Chemical Composition (%)
Si | Mn | Mo | Cr | C |
---|---|---|---|---|
0.40 | 0.80 | 0.60 | 5.0 | 0.08 |
Typical Mechanical Properties
Yeild Strength | Tensile Strength | Elongation 5x D | Impact (ISO-V) |
---|---|---|---|
480 N / mm² | 570 N / mm² | % 20 | +20°C – 48 j |
Applications
Sizes Available & Recomennded Currents
Diam. (mm) | Length (mm) | Current (Amperes) | Arc Voltage | Wire Feed |
---|---|---|---|---|
2.50 | 350 | 65 - 95 | ||
3.25 | 350 | 90 - 130 | ||
4.00 | 450 | 130 - 165 | ||
5.00 | 450 | 190 - 230 |
Welding Current
DC ( +)
Welding Positions
Flat |
Horizontal |
Vertical Up |
Overhead |
Fillet |